The C2R-CHY4 interface allows the replacement of a factory radio in select Chrysler, Dodge and Jeep vehicles with LSFT and MSCAN radios. The C2R-CHY4 also provides a secondary output for adding an optional PAC Steering Wheel Control (SWC) retention interface (SWI-RC, SWI-CP2, SWI-X). The C2R-CHY4 also provides data bus driven outputs such as retained accessory power (RAP), vehicle speed sensor (VSS), illumination, reverse trigger and parking brake.

Compatibility Notes:

• Does not retain uConnect
  
• Does not retain blind spot detection system
  
• Does not provide reverse trigger output in vehicles equipped with a manual transmission
  
• CHYRVD harness required to retain factory reverse camera and RSE.
  
• In Premium Amplified Systems only two input channels can be used from the aftermarket radio, therefore there will be no fading capability of the aftermarket stereo.
  
• Vehicles equipped with a factory Alpine system MUST use revision 1.1.4a or higher 

Important Notes:

• A PAC steering wheel interface must be used in conjunction for SWC retention.
  
• Only one of the two provided radio harnesses will be used. Remove the factory installed radio to determine the correct harness for your particular vehicle.
  
• Vehicles without a factory amplifier: Connect the aftermarket radio’s front and rear speaker wires to the 22-pin plug.
  
• Vehicles with a factory amplifier: The factory amplifier only accepts two audio channels (left and right). The amplifier’s fading is controlled by data communication from the factory radio. The aftermarket radio does not have the ability to control the amplifier’s fader. Connect the front outputs of the aftermarket radio to the rear inputs of the 22-pin radio connector. This will allow navigation voice prompts and Bluetooth calls to be heard. The rear speaker outputs of the aftermarket radio are not used.

Shipping Policy

DBs Car Audio is proud to offer fast & free shipping on all items listed in our store!!

Shipping Methods and Transit Times

DBs Car Audio ships orders from our Kissimmee, Florida location. On occasion, orders will be fulfilled directly by the manufacturer or distributor in order to reduce the shipping time..

Order Tracking

Once an order has been shipped, we send our customers an email with the tracking number for the order. Click on the tracking link in the email to follow the location of the package on the carrier's website. If you did not receive a tracking number by email or need to confirm the tracking information, please contact call us at 1-800-927-9390

Signature Required

Due to the valuable contents of some shipments, DBs Car Audio will only require a signature upon delivery if the order is over $500. Such guidelines will not be overruled upon the customer's request. Please understand that this is a security measure taken by our Company to ensure the safe delivery of each package and guarantee excellent service. Many of our third-party shipping carriers and payment companies require signatures upon delivery to protect against fraud and theft. Customers may request a signature upon delivery by emailing us at dbscaraudiofl@gmail.com.

Shipping Policy Disclaimer

Delivery estimates do not apply to items shipped directly from the manufacturer, nor out-of-stock items. Some items that ship from the manufacturer can only be delivered to addresses within the 48 continental states.

Standard delivery time for domestic customers will average from 2-4 business days, but can take longer in some cases. Saturday, Sunday and national holidays are not considered business days for delivery purposes.

Our Shipping Guarantee applies only to shipments delayed due to our service failure. We will not guarantee shipments that are delayed due to an act of god (ex: weather), a catastrophic event, or failure by our delivery partners. Our guarantee is also voided if incorrect billing or shipping information is given and results in your order being delayed to its destination. Our guarantee is also void if no one is available to sign for shipment when delivery attempt is made if a signature is required.