The AP4-CH42 provides a 6-channel pre-amp output for use with aftermarket audio equipment. Using the full range, fixed level head unit output, in conjunction with CAN messages, the AP4-CH42 delivers a variable 5v RMS pre-amp output with fading, balance, equalization, and level control capabilities.

The module also retains all audio from other vehicle features such as factory navigation prompts, Bluetooth, uConnect, and parking sensor chimes. A data controlled remote amplifier turn on wire is also provided by the AP4-CH42. When used in conjunction with the APA-TOS1 (sold separately), the module can provide a variable 2-channel fiber optic digital audio output (TOSLINK).

These instructions apply to v5 or newer firmware.

Compatibility notes:

• 2025+ RAM Trucks, 2021+ Grand Cherokee L, 2022+ Grand Cherokee (WL), 2022+ Wagoneer/Grand Wagoneer:
  
• Only compatible in vehicles equipped with a factory amplified system. Using the steering wheel controls (SWC) to initiate minimum volume adjust, chime volume adjust and module reset is not available in these vehicles.

Amplified Vehicles

• Compatible with all data-bus controlled amplified systems, no matter the screen size.
• To identify these systems, look for logos on door speakers, tweeters, dash speakers or the subwoofer to confirm if the vehicle has an amplified system (examples: Alpine,
• Harman/Kardon, McIntosh). Some vehicles may not always have branded systems.
• Unbranded amplified systems are generally identified by locating a center channel speaker or subwoofer.

Non-Amplified Vehicles (Excludes vehicles listed above):

• Only compatible in vehicles equipped with the 7" or larger screen. Vehicles equipped with the 5" screen are not compatible.
  
• If you are installing the AmpPRO in a vehicle that is not equipped with a factory amplifier, you must add an amplifier to the vehicle's speakers, as the factory radio will no longer have a 4 channel variable output after it has been reconfigured by the
• AmpPRO. For example, you can not add only a subwoofer to a non-amplified vehicle, as the radio will no longer power the cabin speakers properly.
  
• Non-amplified vehicles equipped with an Active Noise Cancellation (ANC) system require the ANC module to be bypassed. This can be done manually or with the ANC bypass harness ANC-CH01. See page 2 Step 6d to re-configure the factory radio.
  
• If a factory amplifier is present, it must remain connected and in the vehicle after the AmpPRO has been installed.
  
• The remote output is rated at 2A of current. If more current is needed an external relay must be used.
  
• Channels 5 and 6 are non-fading outputs. The output level of channels 5 and 6 can be controlled using the supplied level control knob.
  
• The chime volume and minimum volume levels are set to 0 dB by default. If you are happy with this level in your particular application, additional adjustment is not required. Please refer to the Setup and Configuration section on page 2 for more details.
  The level control knob must be connected in order to manually adjust the chime volume and minimum volume settings.
  The factory radio's speed controlled volume and surround sound mode are not supported by the AP4 outputs.
  When using the TOSLINK output (APA-TOS1 sold separately), DIP switch 1 must be on in order for all warning chimes to be heard through the sound system (see page 2 Step 6a for details).
  No adjustments can be made manually using the programming button, or the factory SWC when the module is connected to a PC.

Shipping Policy

DBs Car Audio is proud to offer fast & free shipping on all items listed in our store!!

Shipping Methods and Transit Times

DBs Car Audio ships orders from our Kissimmee, Florida location. On occasion, orders will be fulfilled directly by the manufacturer or distributor in order to reduce the shipping time..

Order Tracking

Once an order has been shipped, we send our customers an email with the tracking number for the order. Click on the tracking link in the email to follow the location of the package on the carrier's website. If you did not receive a tracking number by email or need to confirm the tracking information, please contact call us at 1-800-927-9390

Signature Required

Due to the valuable contents of some shipments, DBs Car Audio will only require a signature upon delivery if the order is over $500. Such guidelines will not be overruled upon the customer's request. Please understand that this is a security measure taken by our Company to ensure the safe delivery of each package and guarantee excellent service. Many of our third-party shipping carriers and payment companies require signatures upon delivery to protect against fraud and theft. Customers may request a signature upon delivery by emailing us at dbscaraudiofl@gmail.com.

Shipping Policy Disclaimer

Delivery estimates do not apply to items shipped directly from the manufacturer, nor out-of-stock items. Some items that ship from the manufacturer can only be delivered to addresses within the 48 continental states.

Standard delivery time for domestic customers will average from 2-4 business days, but can take longer in some cases. Saturday, Sunday and national holidays are not considered business days for delivery purposes.

Our Shipping Guarantee applies only to shipments delayed due to our service failure. We will not guarantee shipments that are delayed due to an act of god (ex: weather), a catastrophic event, or failure by our delivery partners. Our guarantee is also voided if incorrect billing or shipping information is given and results in your order being delayed to its destination. Our guarantee is also void if no one is available to sign for shipment when delivery attempt is made if a signature is required.