Turn Your Factory Audio into a Beast
The Nemesis Audio NA-LOC6 isn't just another line-output converter. It’s your gateway to transforming a bland stock system into a powerful, custom-tuned setup. With six high-voltage speaker-level inputs and six RCA outputs pushing up to 9.5 volts, it bridges the gap between factory head units and aftermarket amplifiers without breaking a sweat. It plays nice with even the most sensitive factory systems, thanks to selectable input loads and automatic turn-on via DC offset or audio signal. Whether you're adding subs, mids, or a full-range amp, the NA-LOC6 gives your system the muscle and clarity it’s been missing.

Crank the Bass, Cut the Noise, Control It All
With the NA-LOC6, it’s not just about getting sound to your amp. It’s about dialing it in exactly how you want it. Pump up the low-end using the included bass knob with up to 12 dB of boost at 45 Hz, or shape your subwoofer signal with a built-in 250 Hz low-pass filter. The LED clipping indicator keeps your levels in check, while the ground isolation switch fights off annoying alternator noise. And with crystal-clear audio across the 10 Hz to 20 kHz range and a signal-to-noise ratio over 110 dB, you’ll hear every note the way it was meant to be heard.

Features:

• Multi-Channel Integration: Accepts six channels of speaker-level input for full-range signal conversion.
  
• High-Voltage Input Capability: Handles up to 40 volts from factory systems without distortion or damage.
  
• Strong RCA Output Voltage: Provides six channels of output with up to 9.5 volts for clean amplifier signal.
  
• Factory System Compatibility: Designed to work seamlessly with OEM head units and factory wiring.
  
• Automatic Turn-On Function: Activates via DC offset or audio signal detection for convenience and compatibility.
  
• Selectable Input Load Settings: Offers 20, 60, or 20K ohm resistance to prevent shutdown of sensitive factory radios.
  
• Bass Boost Control: Adjustable from 0 to 12 dB at a fixed 45 Hz for added low-end enhancement.
  
• Filter Mode Switch: Selectable full-range or low-pass filter at 250 Hz, applicable to subwoofer output channel.
  
• Channel Mode Selection: Input selector switch enables 4 or 6 channel configuration for system flexibility.
  
• Remote Turn-On Output: Supplies a 12-volt signal to power aftermarket amplifiers or signal processors.
  
• Ground Isolation Options: Switchable ground configurations reduce unwanted noise and alternator interference.
  
• Secure Wiring Interface: Uses Molex terminals for stable connections to speaker signals and power sources.
  
• Included Bass Control Knob: Wired remote lets users adjust subwoofer level directly from the front seat.
  
• Clipping Indicator Light: LED indicator shows signal clipping to assist in proper level tuning.
  
• Low Signal Distortion: Maintains audio quality with total harmonic distortion rated at 0.01 percent.
  
• Wide Frequency Range: Accurately reproduces signals from 10 Hz to 20,000 Hz for full-range performance.
  
• High Signal-to-Noise Ratio: Delivers clean audio with a rating greater than 110 dB.

Specifications:

• Model Number: NA-LOC6
  
• Input Type: 6-channel speaker-level inputs (up to 40V)
  
• Output Voltage: 6-channel RCA outputs (up to 9.5V)
  
• Frequency Response: 10Hz – 20kHz
  
• Total Harmonic Distortion (THD): 0.01%
  
• Signal-to-Noise Ratio: > 110dB
  
• Load Selector: 20Ω / 60Ω / 20kΩ
  
• Turn-On Mode: DC offset or signal detection
  
• 12V Output: For amplifier remote turn-on
  
• Bass Boost: Adjustable 0–12dB (fixed at 45Hz)
  
• Crossover: Selectable full-range or low-pass filter (250Hz, sub-channel only)
  
• Input Selector: 4-channel or 6-channel mode
  
• Ground Isolation Switch: Included
  
• Clip Indicator: LED clip light
  
• Remote Control: Wired bass level knob included
  
• Connectors: Molex terminals for speaker and power connections
  
• Authorized Internet Dealer

Shipping Policy

DBs Car Audio is proud to offer fast & free shipping on all items listed in our store!!

Shipping Methods and Transit Times

DBs Car Audio ships orders from our Kissimmee, Florida location. On occasion, orders will be fulfilled directly by the manufacturer or distributor in order to reduce the shipping time..

Order Tracking

Once an order has been shipped, we send our customers an email with the tracking number for the order. Click on the tracking link in the email to follow the location of the package on the carrier's website. If you did not receive a tracking number by email or need to confirm the tracking information, please contact call us at 1-800-927-9390

Signature Required

Due to the valuable contents of some shipments, DBs Car Audio will only require a signature upon delivery if the order is over $500. Such guidelines will not be overruled upon the customer's request. Please understand that this is a security measure taken by our Company to ensure the safe delivery of each package and guarantee excellent service. Many of our third-party shipping carriers and payment companies require signatures upon delivery to protect against fraud and theft. Customers may request a signature upon delivery by emailing us at dbscaraudiofl@gmail.com.

Shipping Policy Disclaimer

Delivery estimates do not apply to items shipped directly from the manufacturer, nor out-of-stock items. Some items that ship from the manufacturer can only be delivered to addresses within the 48 continental states.

Standard delivery time for domestic customers will average from 2-4 business days, but can take longer in some cases. Saturday, Sunday and national holidays are not considered business days for delivery purposes.

Our Shipping Guarantee applies only to shipments delayed due to our service failure. We will not guarantee shipments that are delayed due to an act of god (ex: weather), a catastrophic event, or failure by our delivery partners. Our guarantee is also voided if incorrect billing or shipping information is given and results in your order being delayed to its destination. Our guarantee is also void if no one is available to sign for shipment when delivery attempt is made if a signature is required.