Sundown Audio SA-Series v.3 15" Subwoofer - 1500 Watts Rms Dual 2-ohm

Sundown Audio SA-Series v.3 15" Subwoofer - 1500 Watts Rms Dual 2-ohm
Sundown Audio SA-Series v.3 15" Subwoofer - 1500 Watts Rms Dual 2-ohm
Sundown Audio SA-Series v.3 15" Subwoofer - 1500 Watts Rms Dual 2-ohm
Sundown Audio SA-Series v.3 15" Subwoofer - 1500 Watts Rms Dual 2-ohm
Sundown Audio SA-Series v.3 15" Subwoofer - 1500 Watts Rms Dual 2-ohm
Sundown Audio SA-Series v.3 15" Subwoofer - 1500 Watts Rms Dual 2-ohm
Sundown Audio SA-Series v.3 15" Subwoofer - 1500 Watts Rms Dual 2-ohm

Sundown Audio SA-Series v.3 15" Subwoofer - 1500 Watts Rms Dual 2-ohm

Regular price $469.99
/
  • Fast & Free Shipping on all USA Orders
  • Have a Question? 1-800-927-9390
  • Safe & Secure payments
  • In stock, ready to ship
  • Inventory on the way
Shipping calculated at checkout.

This SA-15 v.3 series is the next generation upgrade to the v.2 series. We stuck with the 2.75” coil diameter and added another 5mm of length for additional linear x-max (22mm now). We are able to perfectly balance the mass, motor force, and suspension stiffness for the intended power level.

Compared to the v.2 the v.3 features taller cones and wider spiders to enhanced linearity and coil stability to the next level. We also utilized full 3D FEA to further optimize the spider packs for this generation.

The motor also features a large magnet shorting ring (faraday ring) & pole cap faraday ring to reduce distortion and deliver smoother response across the entire acoustic spectrum. With the v.3 upgrade we integrated a completely "locked-in" faraday ring that is physically held in place by the T-Yoke.

The motor & coil setup is mated to an extremely robust multi-layer spider with fully tied-on & doubled-up “XL” tinsel leads. A competition-grade paper cone, strong foam surround, and custom-tooled aluminum frame (same frame as the bigger brother U v.2 series) are used to complete this masterpiece.

On top of the ~22mm of one-way linear excursion we have an x-mech limit of 41mm one-way before coil bottom making it nearly "bottomless." The new motor was designed as a "little brother" to the U v.2 series so you will also note the updated venting system with a solid pole piece from the back and channeled pole on the inside.

Features

  • 1500 Watts RMS / 3000 Watts Peak
  • Dual 2 ohm voice coils
  • Vented magnetic gap & solid pole piece with vent channels
  • Aluminum 2.75” voice coil former for superior heat dissipation
  • Innovative high velocity, cast aluminum vented frame spacer ring
  • Magnet ID faraday ring & pole cap faraday ring for smooth acoustic response
  • High-temperature copper voice coil wire
  • Spring-loaded terminals
  • Stitched-on double “XL” tinsel leads

Power Handling

  • RMS Power: 1500 Watts
  • Peak Power: 3000 Watts

T/S Parameters

  • Re: 3.40 Ω
  • Fs: 35 Hz
  • Qms: 2.7300
  • Qes: 0.6250
  • Qts: 0.5090
  • Vas: 44.002 L
  • Mms: 458.73 g
  • Cms: 0.04 mm/N
  • BL: 24.002 T·m
  • Le: 3.63 mH
  • Sd: 1141.9 cm²
  • Xmax: 22mm
  • Xmech: 40mm
  • SPL (1W/1m): 87.3 dB

Enclosure Recommendations

  • Sealed Enclosure: 1.5cu ft
  • Ported Enclosure: 3.0cu ft
  • Recommended Port Tuning: 35hz
  • Recommended Port Area: 44sq in
  • 4th Order Sealed: 1.5cu ft
  • 4th Order Ported: 4.5cu ft
  • 4th Order Port Area: 90sq in
  • 4th Order Port Length: 6"

Measurements

  • Displacement: 0.22
  • Mounting Depth: 8.65"
  • Outside Diameter: 15.6"
  • Cutout Diameter: 14.1"
  • Motor Diameter: 7.8"

Shipping Policy

DBs Car Audio is proud to offer fast & free shipping on all items listed in our store!!

Shipping Methods and Transit Times

DBs Car Audio ships orders from our Kissimmee, Florida location. On occasion, orders will be fulfilled directly by the manufacturer or distributor in order to reduce the shipping time..

Order Tracking

Once an order has been shipped, we send our customers an email with the tracking number for the order. Click on the tracking link in the email to follow the location of the package on the carrier's website. If you did not receive a tracking number by email or need to confirm the tracking information, please contact call us at 1-800-927-9390

Signature Required

Due to the valuable contents of some shipments, DBs Car Audio will only require a signature upon delivery if the order is over $500. Such guidelines will not be overruled upon the customer's request. Please understand that this is a security measure taken by our Company to ensure the safe delivery of each package and guarantee excellent service. Many of our third-party shipping carriers and payment companies require signatures upon delivery to protect against fraud and theft. Customers may request a signature upon delivery by emailing us at dbscaraudiofl@gmail.com.

Shipping Policy Disclaimer

Delivery estimates do not apply to items shipped directly from the manufacturer, nor out-of-stock items. Some items that ship from the manufacturer can only be delivered to addresses within the 48 continental states.

Standard delivery time for domestic customers will average from 2-4 business days, but can take longer in some cases. Saturday, Sunday and national holidays are not considered business days for delivery purposes.

Our Shipping Guarantee applies only to shipments delayed due to our service failure. We will not guarantee shipments that are delayed due to an act of god (ex: weather), a catastrophic event, or failure by our delivery partners. Our guarantee is also voided if incorrect billing or shipping information is given and results in your order being delayed to its destination. Our guarantee is also void if no one is available to sign for shipment when delivery attempt is made if a signature is required.

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

Recently viewed