2014-2020 Dodge Durango Integrated Radio Replacement Kit.

The RPK4-CH4102 is a complete radio replacement kit with integrated climate control retention for the 2014-2020 Dodge Durango. All modules and cables are included to retain important features of the factory system including: steering wheel-mounted radio controls, factory reverse camera, and AM/FM reception.

A secondary 5.2” LCD screen is added for additional vehicle features and controls including: vehicle performance gauges and information, climate controls, vehicle settings, factory amplifier control, and forced camera activation. Simplified installation and setup menus allow direct programming of camera triggers, steering wheel controls, and other settings of the kit and RP4.2-CH4102 interface. Features provided by the LCD screen will vary based on the vehicle features.

Four hard buttons added to the radio dash bezel (below the 5.2” LCD screen) allow the user to set presets to control functions including: specific climate controls, forced camera activation, and LCD screen controls. Options for hard buttons will vary based on vehicle features and which cameras are installed. Button inserts and seven button openings on the radio dash bezel allow for retention of functions that would typically be lost when replacing the factory radio.

Some advanced features require additional accessories (sold separately).

Does not retain the following features in the vehicle's cluster display:

• Compass
  
• Phone Pop-Ups
  
• Navigation Pop-Ups
  
• Clock

Does not retain the following uConnect features:

• Uconnect Access Remote Start / Lock / Unlock
  
• Vehicle Location Service
  
• WiFi Hotspot
  
• SOS/Assist

*Does not retain factory amplifiers Speed Controlled Volume*

**If more cameras are being added beyond a reverse camera, PAC part number RPA-16P5V must be used**

***Does not retain factory rear seat entertainment***

Important Notes:

• In vehicles equipped with parking sensors, you must use the included external speaker in order to continue hearing parking sensor chimes. If the vehicle has a factory amplified system and parking sensors, the speaker is not necessary unless the factory amplifier is no longer being used. In cases where the factory amplifier and aftermarket amplifier are being used (for example, using an aftermarket amplifier for the front speakers and using the factory amplifier for the rear speakers), the RPK4-CH4102 allows the chime output to the external speaker to be set to the channels that are being driven off of the aftermarket amplifier.
  
• If you are adding additional cameras, PAC part number RPA-16P5V (sold separately) must be used to connect up to 5 total cameras.
  
• It is very important that the vehicle’s accessory buttons be programmed and tested right away. If they do not operate, it is likely because the incorrect CAN wire connections are being used. In 2018+ vehicles, the CAN connections must be made at the vehicle’s star connector (see page 10 for details). Failure to do so will cause the vehicle’s accessory buttons to not operate and may cause the vehicle’s battery to drain. We recommend reading this manual thoroughly to familiarize yourself with the entire process prior to beginning the installation.
  
• In newer (2018+) vehicles, the factory amplifier may not work or the audio level will be low until the ignition is cycled. Make sure the aftermarket radio’s volume level is turned down prior to cycling the ignition to prevent excess volume after the ignition cycle!
  
• Only in some 2014 Durangos: All vehicle settings options will be listed in the vehicle settings menu, including vehicle settings that are not available for your vehicle. The only settings options that can be changed and saved, are options that were available through the factory radio

Shipping Policy

DBs Car Audio is proud to offer fast & free shipping on all items listed in our store!!

Shipping Methods and Transit Times

DBs Car Audio ships orders from our Kissimmee, Florida location. On occasion, orders will be fulfilled directly by the manufacturer or distributor in order to reduce the shipping time..

Order Tracking

Once an order has been shipped, we send our customers an email with the tracking number for the order. Click on the tracking link in the email to follow the location of the package on the carrier's website. If you did not receive a tracking number by email or need to confirm the tracking information, please contact call us at 1-800-927-9390

Signature Required

Due to the valuable contents of some shipments, DBs Car Audio will only require a signature upon delivery if the order is over $500. Such guidelines will not be overruled upon the customer's request. Please understand that this is a security measure taken by our Company to ensure the safe delivery of each package and guarantee excellent service. Many of our third-party shipping carriers and payment companies require signatures upon delivery to protect against fraud and theft. Customers may request a signature upon delivery by emailing us at dbscaraudiofl@gmail.com.

Shipping Policy Disclaimer

Delivery estimates do not apply to items shipped directly from the manufacturer, nor out-of-stock items. Some items that ship from the manufacturer can only be delivered to addresses within the 48 continental states.

Standard delivery time for domestic customers will average from 2-4 business days, but can take longer in some cases. Saturday, Sunday and national holidays are not considered business days for delivery purposes.

Our Shipping Guarantee applies only to shipments delayed due to our service failure. We will not guarantee shipments that are delayed due to an act of god (ex: weather), a catastrophic event, or failure by our delivery partners. Our guarantee is also voided if incorrect billing or shipping information is given and results in your order being delayed to its destination. Our guarantee is also void if no one is available to sign for shipment when delivery attempt is made if a signature is required.