The AudioControl EPIC Series Amplifier delivers massive, heart-pounding bass in a thermally efficient design. Perfectly paired with The EPICENTER Bass Restoration Processor (sold separately), it enhances your bass experience to insane levels.  The EPIC4000 is the definitive engine for competition-grade audio. Engineered for extreme efficiency and uncompromising stability down to the lowest impedances, this amplifier is built with oversized components and advanced thermal management to deliver its rated wattage reliably, not just on the bench, but deep into every demanding track. It’s not just about loudness; it's about converting colossal power into pure low-frequency output that dominates the sound stage and achieves legendary SPL scores. 

Digital Class-D Amplifier: Powerful and stable down to a 1 ohm load.

• 0-12dB Variable Bass Boost Q: Selects the frequency to boost
  
• Direct Wire Terminals with Hex Screws: Provide solid, reliable connections.
  
• Dual 0-Gauge Power Terminal and 8-Gauge Speaker Terminal: Designed for maximum current flow.
  
• 91dB+ Signal-to-Noise Ratio (@ CEA Standard): Ultra-efficient idle draw (< 0.5-1A).
  
• Smart Auto Reset Protection Circuit: Multiple protection modes are in place to prevent damage if your amplifier encounters an issue.
  
• Output Over-Current Protection (OCP)
  
• Input Over-Voltage Protection (OVP)
  
• Input Under-Voltage Protection (UVP)
  
• Output DC-Offset Protection (DCP)
  
• Over-Temperature Protection (OTP)

THE EPICENTER LINK: Simplify your install by connecting the EPIC amplifier directly to an EPICENTER bass restoration processor.

Install Requirements:

• Two 0-gauge power wires and two 0-gauge ground wires are required for this amplifier to function. This amp is living the high-current lifestyle!
  
• Each 0-gauge power wire must have a 200-amp fuse installed within 12 inches of its connection to the battery. This amp likes its fuse like it likes its bass: close and reliable.
  
• Use only high-quality 0-gauge OFC (oxygen-free copper) wire for all power and ground connections. Keep your power clean and your bass mean!
  
• Do NOT mount the amplifier to subwoofer enclosures. These two like their personal space.

Features:

• High-Power, Competition-Grade Class D: Experience high performance and thermal efficiency that delivers monster power to the most demanding subwoofer systems.
  
• High-Current Design – 1Ω Stable: Provides massive, stable power output necessary to drive the most demanding low-impedance speaker loads at 4000W RMS @ 1 ohm.
  
• Smart Auto-Reset Protection Circuit: Multiple protection modes are in place to prevent damage if your amplifier should encounter an issue.
  
• 12 dB/octave Linkwitz-Riley Variable Low Pass & Subsonic Filters: Fine-tune your audio setup, matching your subwoofer’s frequency range for ground-shaking bass performance while protecting your subwoofers in vented enclosures.
  
• EPIC Boost Variable Frequency Bass Boost: Hear your bass slam with a variable frequency (30 to 80 Hz) bass equalizer with a boost range of 0 dB to +12 dB.
  
• Solid Power/Speaker Terminals with Hex Screws: Secures maximum current flow and signal integrity, ensuring low-resistance connections for consistent performance.
  
• EPICENTER Link: Simplify installation with the EPICENTER LINK (included) to seamlessly connect the EPIC amplifier and The EPICENTER bass restoration processor (sold separately) for an unbeatable bass experience and 1A fuse protection to safeguard your equipment.

Continuous Power (RMS) @ 14.4V:

• 1 x 1000 Watts @ 4 ohms
  
• 1 x 2000 Watts @ 2 ohms
  
• 1 x 4000 Watts @ 1 ohm
  
• 1 x 8000 Watts @ 2 ohms Bridged (Strapped)

Specifications:

• Frequency Response (+/- 1 dB): 10 Hz – 190 Hz
  
• S/N Ratio: 104.8 dBa, Ref 1000 Watts @ 4 ohms
  
• Dual Power / Ground Wire Gauge: 0/1 AWG
  
• Recommended Fuse Rating: 200 Amp x 2 / 400 Amps x 1
  
• Low Pass Filter: 12dB/octave Linkwitz-Riley, 40 Hz to 180 Hz
  
• Subsonic Filter: 12 dB/octave Linkwitz-Riley, Off to 50 Hz
  
• EPIC Boost: Frequency Center: 30 Hz to 80 Hz, Gain: 0 to 12 dB
  
• Speaker Terminal Wire Gauge: 8 AWG
  
• Strapable: Yes
  
• Epicenter Link: Yes

Measurements:

• 21 in x 6.1 in x 2.04 in

Shipping Policy

DBs Car Audio is proud to offer fast & free shipping on all items listed in our store!!

Shipping Methods and Transit Times

DBs Car Audio ships orders from our Kissimmee, Florida location. On occasion, orders will be fulfilled directly by the manufacturer or distributor in order to reduce the shipping time..

Order Tracking

Once an order has been shipped, we send our customers an email with the tracking number for the order. Click on the tracking link in the email to follow the location of the package on the carrier's website. If you did not receive a tracking number by email or need to confirm the tracking information, please contact call us at 1-800-927-9390

Signature Required

Due to the valuable contents of some shipments, DBs Car Audio will only require a signature upon delivery if the order is over $500. Such guidelines will not be overruled upon the customer's request. Please understand that this is a security measure taken by our Company to ensure the safe delivery of each package and guarantee excellent service. Many of our third-party shipping carriers and payment companies require signatures upon delivery to protect against fraud and theft. Customers may request a signature upon delivery by emailing us at dbscaraudiofl@gmail.com.

Shipping Policy Disclaimer

Delivery estimates do not apply to items shipped directly from the manufacturer, nor out-of-stock items. Some items that ship from the manufacturer can only be delivered to addresses within the 48 continental states.

Standard delivery time for domestic customers will average from 2-4 business days, but can take longer in some cases. Saturday, Sunday and national holidays are not considered business days for delivery purposes.

Our Shipping Guarantee applies only to shipments delayed due to our service failure. We will not guarantee shipments that are delayed due to an act of god (ex: weather), a catastrophic event, or failure by our delivery partners. Our guarantee is also voided if incorrect billing or shipping information is given and results in your order being delayed to its destination. Our guarantee is also void if no one is available to sign for shipment when delivery attempt is made if a signature is required.